Skip to main content

Pudsey Plumbers

24-hour emergency plumber in Pudsey · No call-out charge · 0113 418 2899
G3 qualified · Unvented cylinders

Unvented cylinder repairs in Pudsey

Unvented hot water cylinders give you mains-pressure hot water, but when they go wrong you can lose hot water completely. We are G3 qualified and repair and service unvented cylinders across Pudsey and Leeds, with no call-out charge.

  • No call-out charge
  • 24-hour emergencies
  • 25+ years' experience
  • Work guaranteed

No hot water?

0113 418 2899
  • We aim to arrive within the hour for emergencies
  • Charged from arrival, never for travel
  • Debit cards and phone payments accepted
  • OAP discounts available
0113 418 2899

Common unvented cylinder faults

  • No hot water, or water that is only lukewarm
  • Water dripping or running from the tundish (the small funnel on the pipework)
  • Hot water pressure dropping, or pressure that is far too high
  • Banging or noisy pipes when taps are turned on
  • Immersion heater not working
  • Cylinder thermostat or high-limit cut-out tripping
  • Motorised valve stuck, so the boiler won’t heat the cylinder

G3 qualified for unvented cylinders

Unvented hot water cylinders are stored at mains pressure, so under Building Regulations Part G3, installation and work on their safety controls must be done by someone with G3 unvented qualifications. We are G3 qualified, so your cylinder is worked on safely and correctly, and your manufacturer’s warranty is protected.

What we repair and replace

Unvented cylinders have several safety and control parts that wear out over time. We test and replace:

  • Expansion vessels, including re-charging the air pressure
  • Pressure reducing valves and line strainers
  • Pressure relief and temperature relief valves
  • Immersion heaters and thermostats
  • Cylinder thermostats and motorised zone valves

We work on the popular makes found in Leeds homes, including Megaflo-style cylinders.

Why your tundish is dripping

A dripping tundish is the most common call we get about unvented cylinders. It means water is being released through a safety valve. Often the expansion vessel has lost its charge, or a relief valve is worn. It shouldn’t be ignored, as these valves protect the cylinder. Call us and we’ll find the cause.

Annual unvented cylinder servicing

Manufacturers recommend that unvented cylinders are serviced every year to keep the safety devices working and protect your warranty. A service includes checking the expansion vessel charge, testing the relief valves, cleaning the strainer and checking the incoming pressure.

Local to you

Areas we cover around Pudsey

We are based in Pudsey and cover the whole of Leeds, with most of our work in the LS28, LS13 and LS12 areas.

FAQs

Unvented cylinder questions

Are you G3 qualified?

Yes. We are G3 qualified to work on unvented hot water cylinders, as required by Building Regulations Part G3.

Why is water coming out of my tundish?

Usually the expansion vessel needs re-charging or a pressure or temperature relief valve is letting by. It is a safety warning, so get it checked.

Why have I got no hot water from my unvented cylinder?

Common causes are a failed immersion heater, a tripped high-limit thermostat, a stuck motorised valve or a boiler fault. We test each part to find the problem.

How often should an unvented cylinder be serviced?

Once a year, to check the safety valves and expansion vessel and to keep the manufacturer's warranty valid.

Is there a call-out charge?

No. You pay from the time we arrive, plus any parts.

Problem with your unvented cylinder?

No call-out charge, an itemised invoice, and you don't pay until you're happy with the work.

0113 418 2899